JRC Alpatron AlphaMidiCourse, Инструкция по установке и эксплуатации

Страница: 14 / 82

III.6 Timer Start
The Gyro Compass can be automatically started according to date and time set for the departure.
Note It can be set up to one month maximum.
For setting up the departure date and time, operate according to Set Timer Starting Time on page 39 in chapter
Operations.
III.7 Function of the External Heading Sensor
When the external heading sensor signal (the magnetic compass system, etc.) is connected to the AlphaMidiCourse, the
repeater signal (serial signal or step signal) can be sent from this system by using the external heading sensor.
Also when the processing unit for the external heading sensor signal is built into the AlphaMidiCourse as an option, the
repeater signal (2 circuits for serial signal and 1 circuit for step signal) can be backed up by using the external heading
sensor, even if the Gyro Compass stops.
Note For the system selection, refer to System Selection on page 45 chapter Operation.
III.8 Warranty Conditions
For Warranty Conditions contact Alphatron Marine.
14 | Introduction