JRC Alpatron AlphaMidiCourse, Инструкция по установке и эксплуатации

Страница: 7 / 82

II Caution
To safely install and operate this instrument, so as not to adversely affect the warranty, the WARNINGS and CAUTIONS
must be adhered to.
II.1 Warning Label
The following warning label is attached to this system.
II.2 Location Warning Label
The warning label is attached to the inside of the door of the Control Panel. See Figure 45: Stand alone type Control Unit
of One Gyro Compass System on page 72
II.3 Cautions
• WARNING - Clarification
• Indicates potential risk of injury or death to users of the product.
• WARNING - Operations
• Improper operations caused by failure of this product, or malfunctions caused by operator's misunderstanding
may cause collision or grounding and may result in property damage and environmental pollution. Also, death
or serious injury may happen.
• Full attention must be paid in the use of this product by understanding its limitations in performance and
characteristics. Thoroughly familiarize yourself with the operation of this product.
• WARNING - Operations
• Carefully observe the CAUTIONS and WARNINGS prior to starting up and operating this product.
• Read the Operator Manual of the automatic steering system carefully and prepare for the occurrence of
trouble or alarm in this product. Ensure the emergency steering method is well understood to quickly respond
to trouble.
• WARNING - Maintenance
• During maintenance or check of the product, touching internal parts may cause electric shock, because
the ship's power supply is still connected to the system distribution board, even if the main power switch of
this product is turned "OFF". Do not touch internal parts such as terminal boards, power supply unit, etc. If
necessary, disconnect the power cable from the ship’s distribution board. A warning label is attached to point
out this danger.
• WARNING
• Matters requiring attention in starting up and operations during progress are described in chapter Operations
and are punctuated with a CAUTION or a WARNING, which must be strictly observed.
• Attentively read the Operator Manual of the automatic steering system carefully preparing for occurrence of
trouble or alarm in this system. The emergency steering method should be well understood to easily respond
to failures, or alarms.
• WARNING - Power Supply Failure (alarm code 1)
• Pay full attention to avoid electric shock when checking the power supply.
• When checking fuses, turn "OFF" the power switch on the operating panel and further disconnect the power
cable from the ship’s distribution board before checking fuses.
7 | Caution