joke 4910880, Руководство пользователя

Страница: 14 / 68

14 SAFETY
The welding system is fi tted with seals at various points. The seals must not be broken or removed for any
reason. In fact, the sealed parts may only be opened by joke Technology GmbH personnel.
Labels and plates are applied to the equipment in accordance with European safety regulations. These must
not be removed or damaged. If replacements are required, contact joke Technology GmbH.
WARNING LABELS
SAFETY LABELS
NOTE: If the seals affi xed to the laser system by the manufacturer are removed or damaged in
any way, the warranty covering the entire welding system shall be considered null and void.
ATTENTION: The manufacturer declines all responsibility for improper use of its products. The
device must not be started up unless the machine it is to be installed on has been declared to
comply with the current directives.
ATTENTION: Access to the internal parts of the electrical equipment is restricted to authorised,
qualifi ed personnel who are aware of the electrical risks!
joke Technology GmbH
disclaims all liability in the event that any work is carried out on live electrical
parts by unqualifi ed and/or untrained personnel!
ATTENTION: Access to the internal parts of the laser resonator is restricted to authorised, qualifi ed
personnel who are aware of the optical risks!
joke Technology GmbH
disclaims all liability for any
work carried out by unqualifi ed and/or untrained personnel!
Figure 5 – Laser Warning
This label indicates that the machine is equipped with a laser device,
without specifying the respective class. It is 22 x 55 mm in size and
positioned near the resonator slide where the laser beam originates.
When this label is present it is mandatory to use the appropriate
protective eyewear for the type of laser present on the machine. In the
case of ENESKA, use glasses that meet the requirements set out on
page 12 when operating the machine.
This label indicates that the machine is equipped with a laser device,
without specifying the respective class. It is 104 x 52 mm / 52 x 26 mm
in size and positioned on the rear of the machine. When this label is
present, it is mandatory to use the appropriate protective glasses, as
recommended on page 12, when operating the machine.
This label indicates the area where the laser exits the machine. It is
104 x 26 mm in size and positioned on the focal extension. When
this label is present, it is mandatory to use the appropriate protective
glasses, as recommended on page 12, when operating the machine.
This label indicates that the machine is equipped with a laser device,
as well as specifying the respective class. It is 104 x 52 mm / 52
x 26 mm in size and positioned on the front of the machine below
the handle. When this label is present, it is mandatory to use the
appropriate protective glasses, as recommended on page 12, when
operating the machine.
Figure 6 – Radiation information
Figure 8 – Laser aperture information
Figure 7 – Laser class information