Johnson Controls 050, Установка, эксплуатация и обслуживание

Страница: 103 / 166

JOHNSON CONTROLS
103
SECTION 6 – USER INTERFACE
FORM 100.50-NOM6
ISSUE DATE: 8/07/2017
6
TABLE 33 - PARAMETER POINTS LIST
ADDRESS
NUMBER
DESCRIPTION UNITS OF ADJUSTMENT
RANGE OF
ADJUSTMENT
CURRENT
SETTING
1 Run Test Parameter Bit 0 = OFF, 1 = ON OFF
2 Heat Fan On Delay Seconds 0-30 30
3 Heat Fan Off Delay Seconds 0-255 60
4 Cool Fan On Delay Seconds 0-30 0
5 Cool Fan Off Delay Seconds 0-255 30
6 Address Data 1-250 1
7 Turn Off Continuous Fan When Starting Parameter Bit 0 = OFF, 1 = ON OFF
8 Construction Mode Parameter Bit 0 = OFF, 1 = ON OFF
9 Unoccupied Override Time Period Data Minutes
0-240
0 = Disabled
60 Minutes
10 CV Occupied Cooling Setpoint Degrees F 45° - 99° 72°
11 CV Occupied Heating Setpoint Degrees F 45° - 99° 68°
12 CV Unoccupied Cooling Setpoint Degrees F 45° - 99° 85°
13 CV Unoccupied Heating Setpoint Degrees F 45° - 99° 60°
14 Supply Air Temp Limit For Cooling Enable Parameter Bit 0 = OFF, 1 = ON ON
15 Supply Air Temp Limit Cooling Setpoint Degrees F 40° - 65° 50°
16 Supply Air Temp Limit For Heating Enabled Parameter Bit 0 = OFF, 1 = ON ON
17 Supply Air Temp Limit Heating Setpoint Degrees F 100° - 180° 135°
18 Hydronic Heating Enabled Parameter Bit 0 = OFF, 1 = ON OFF
19 Hydronic Heating Stage #1 Supply Air Setpoint Degrees F 80° - 180° 120°
20 Hydronic Heating Stage #2 Supply Air Setpoint Degrees F 80° - 180° 150°
21 Hydronic Heat Actuator Valve Reverse Acting Parameter Bit 0 = OFF, 1 = ON OFF
22 Remote Control Input Enable For Third Party BAS Parameter Bit 0 = OFF, 1 = ON OFF
23 Vav Cooling Supply Air Temp Upper Setpoint Degrees F 40° - 70° 60°
24 Vav Cooling Supply Air Temp Lower Setpoint Degrees F 40° - 70° 55°
25 Vav Supply Air Temp Reset Setpoint Degrees F 40° - 85° 72°
26 Vav Occupied Heating Enabled Parameter Bit 0 = OFF, 1 = ON OFF
27 Vav Occupied Heating Setpoint Degrees F 40° - 85° 68°
28 Morning Warm Up Enable Parameter Bit 0 = OFF, 1 = ON ON
29 Morning Warm Up /Vav Return Air Temp Setpoint Degrees F 50° - 85° 70°
30 Duct Pressure Setpoint Pressure - Inches of H2O 0.000 - 5.000 1.500
31 Building Pressure Setpoint Pressure - Inches of H2O -.250 -.250 0.1
32 Economizer Installed Parameter Bit 0 = OFF, 1 = ON ON
33 Economizer First Stage Setpoint Degrees F 40° - 65° 55°
34 Economizer Second Stage Setpoint Degrees F 40° - 65° 50°
35 Economizer Minimum Position Percent 0 - 100% 20%
36 Outside Air Humidity Sensor Installed Parameter Bit 0 = OFF, 1 = ON OFF
37 Economizer Outside Air Enthalpy Setpoint BTUs per Pound 10 - 50 27
38 Return Air Humidity Sensor Installed Parameter Bit 0 = OFF, 1 = ON OFF
39 Economizer Outside Air Temp Enable Setpoint Degrees F 40° - 80° 55°
40 Demand Ventilation (IAQ) Enabled Parameter Bit 0 = OFF, 1 = ON OFF
41 IAQ Sensor Range Parts per Million 0 - 5000 PPM 2000
42 Iaq Setpoint Parts per Million 0 - 5000 PPM 1000
43 Power Exhaust Installed Parameter Bit 0 = OFF, 1 = ON ON
44 Modulating Power Exhaust Installed Parameter Bit 0 = OFF, 1 = ON OFF
45 Exhaust Vfd Installed Parameter Bit 0 = OFF, 1 = ON OFF