JLG ERT2669, Руководство по обслуживанию и ремонту

Страница: 54 / 376

SECTION 2 - GENERAL
2-14 31215923
Fuel Tank
• Fuel - Diesel or Gasoline (Per Engine Type - Reference
Decal on Machine)
• Capacity - 10 gal (38 l)
Drive Hub
• Lube Points - Fill Plugs (4)
• Lube - EPGL
• Interval - Every 2 years or 1200 hours
Scissor Arms - Sliding Wear Pads
• Lube Points - 8 Sliding Wear Pads.
• Lube - MPG
• Interval - Every month or 50 hours
Hydraulic Oil Tank
• Lube Point - Fill Cap/Fill Level
• Lube - HO - API service classification GL-3
(Refer to Figure 1-2.)
• Interval - Check oil every 10 hours of operation;
change oil every 2 years or 1200 hours of operation.
• Capacity - 13.2 gal (50 l) (For MRT)
• Capacity - 10.6 gal (40 l) (For ERT)
Engine Coolant
• Lube Point(s) - Radiator fill cap/Coolant Reservoir
Bottle
• Interval - Check coolant level daily. Ensure it is
between the FULL and LOW lines. If coolant level is
low, allow fluid to cool, then add as required. Replace
coolant every two years in accordance with engine
manual.
NOTE: Machine is filled with ELC (Extended Life Coolant)
from factory, do not mix with any other coolant type.
MAF42190 MAF42200
MAF42850