JLG ERT2669, Руководство по обслуживанию и ремонту

Страница: 302 / 376

SECTION 5 - JLG CONTROL SYSTEM
5-60 31215923
99354 9 9 "Rear Right Module - Internal Error (243 -
Hl Sw Timeout)"
Drive, Lift Up and Leveling Jack Func-
tions are Prevented. • UGM is detecting that the Right Power Module is communi-
cating that there is an internal error with the Module.
• Cycle power and see if the issue persists.
• Contact JLG Support.
99355 9 9 "Rear Left Module - Internal Error (235 -
Ctrap Threshold)"
Drive, Lift Up and Leveling Jack Func-
tions are Prevented. • UGM is detecting that the Left Power Module is communi-
cating that there is an internal error with the Module.
• Cycle power and see if the issue persists.
• The module will need replaced.
99355 9 9 "Rear Left Module - Internal Error (160 -
Wait For Nod1)"
Drive, Lift Up and Leveling Jack Func-
tions are Prevented. • UGM is detecting that the Left Power Module is communi-
cating that the Module has a Supervisor Microprocessor
Fault and is waiting for a CAN message on one of the Nodes.
• Check CAN2 buss connections on machine. Check MS434 and
module connector CO371-J1 pins 27 and 28. If no issues
found, then contact JLG Support.
99355 9 9 "Rear Left Module - Internal Error (232 -
Cont Drv EV)"
Drive, Lift Up and Leveling Jack Func-
tions are Prevented. • UGM is detecting that the Left Power Module is communi-
cating that there is an internal error with the Module.
• Cycle power and see if the issue persists.
• The module will need replaced.
99355 9 9 "Rear Left Module - Internal Error (253 -
Field Oirent KO)"
Drive, Lift Up and Leveling Jack Func-
tions are Prevented. • UGM is detecting that the Left Power Module is communi-
cating that there is an internal error with the Module.
• Contact JLG Support.
99355 9 9 "Rear Left Module - Internal Error (245 - IQ
Mismatched)"
Drive, Lift Up and Leveling Jack Func-
tions are Prevented. • UGM is detecting that the Left Power Module is communi-
cating that there is an internal error with the Module.
• Cycle power and see if the issue persists.
• Contact JLG Support.
99355 9 9 "Rear Left Module - Internal Error (200 -
VDC Off Shorted)"
Drive, Lift Up and Leveling Jack Func-
tions are Prevented. • UGM is detecting that the Left Power Module is communi-
cating that the measured voltage across the DC-link is out of
range high.
• Check the battery voltage and 48V connections to the mod-
ule. If no issues found, then contact JLG Support.
99355 9 9 "Rear Left Module - Internal Error (239 -
Controller Mism)"
Drive, Lift Up and Leveling Jack Func-
tions are Prevented. • UGM is detecting that the Left Power Module is communi-
cating that the Software is not compatible with the Hard-
ware.
• Cycle power and see if the issue persists.
• Contact JLG Support.
99355 9 9 "Rear Left Module - Internal Error (201 -
Param Config #)"
Drive, Lift Up and Leveling Jack Func-
tions are Prevented. • UGM is detecting that the Left Power Module is communi-
cating that one of the Module's parameters is out of range or
configuration is incompatible.
• Cycle power and see if the issue persists.
• Contact JLG Support.
99355 9 9 "Rear Left Module - Internal Error (197 -
Wrong Slave Ver)"
Drive, Lift Up and Leveling Jack Func-
tions are Prevented. • UGM is detecting that the Left Power Module is communi-
cating that there is a software mismatch between the Mas-
ter and Supervisor Microcontrollers.
• Re-flash the latest Power software to the module. Contact
JLG Support if the problem continues.
99355 9 9 "Rear Left Module - Internal Error (198 -
Ms Par Check Mism)"
Drive, Lift Up and Leveling Jack Func-
tions are Prevented. • UGM is detecting that the Left Power Module is communi-
cating that there is an internal error with the Module.
• Cycle power and see if the issue persists.
• Contact JLG Support.
DTC
Code
Flash
Code
Description Action Item Check List