JLG ERT2669, Руководство по обслуживанию и ремонту

Страница: 315 / 376

SECTION 5 - JLG CONTROL SYSTEM
31215923 5-73
5.10 MACHINE CONFIGURATION AND PROGRAMMING SETTINGS (FOR RT)
The Machine Configuration Programming must be completed before any Personality settings (Table 5-8) can be
changed. Changing the personality settings first and then changing the model number of the machine configuration
will cause the personality settings to return to default values.
Table 5-2. Machine Configuration Programming Information (For RT)
Configuration Digit Setting Description Default Number
MODEL NUMBER:
1
0
1
2
3
4
5
NO MODEL
UNKNOWN
RT2669
RT3369
RT4069
RT4769
1
MARKET:
2
0
1
2
3
4
5
6
7
ANSI USA
ANSI EXPORT
CSA
CE
AUSTRALIA
JAPAN
GB
KOREA
0
ENGINE:
3
0
1
KBD1305E5X-18
KBWG972E5X-24
0
DRIVE TYPE:
4
0
1
2WD
4WD 1
LEVELING JACKS:
5
0
1
No - Leveling Jacks not installed on vehicle.
YES - Leveling Jacks are installed on vehicle.
0
GENERATOR:
6
0
1
NO - Generator is not installed on vehicle.
YES - Generator is installed on vehicle.
0
LOAD SYSTEM:
7*
0
1
2
NO: Load system is not installed
CUTOUT PLT –Lift and drive prevented from platform mode when machine overload
state = true.
CUTOUT ALL – Lift and drive prevented from platform AND gnd mode when machine overload
state = true.
* Different Defaults by market: CE & GB = 2
1
GROUND ALARM:
8*
0
1
2
MOTION - Alarm sounds during ALL machine functions
HORN ONLY - Alarm sounds only when platform alarm button is pressed
DESCENT - Alarm sounds only during lift down
* Different Defaults by market: CE = 0
0
ENGINE SHUTDOWN:
9
0
1
NO - The engine will not be automatically shutdown.
YES - Engine Shutdown functionality is active 1
BEACON :
10
0
1
YES - Beacon is present
NO - Beacon is not present 1
WHT. NOISE ALARM:
11
0
1
YES - White noise alarm is present
NO - White noise alarm is not present 1
AXLE CONFIG:
12
0
1
SINGLE
DUAL
0
CLEARSKY:
13
0
1
NO - Clearsky option is not present
YES - Clearsky option is present
0
DISPLAY UNITS :
14
0
1
METRIC
IMPERIAL 1
1001255237_B