JLG ERT2669, Руководство по обслуживанию и ремонту

Страница: 143 / 376

SECTION 3 - CHASSIS, PLATFORM, & SCISSOR ARMS
31215923 3-85
IC Series Setup and Troubleshooting Guide
IC650 – DC OUTPUT
BE CAREFUL TO NOT ALLOW BATTERY VOLTAGE TO BE APPLIED TO THE
BLADE TERMINALS (C1, C2, C3) AS IT WILL RESULT IN PERMANENT
DAMAGE TO THE CHARGER.
IC900/IC1200 – DC OUTPUT
BE CAREFUL TO NOT ALLOW BATTERY VOLTAGE TO BE APPLIED TO THE
BLADE TERMINALS (L1, L2, C1, C2, C3, F+, F-) AS IT WILL RESULT IN
PERMANENT DAMAGE TO THE CHARGER.
Table 3-11. IC650 – DC Output
Pin
Recommended
Wire Size (AWG/
mm2)
Description Notes
- 12/4.0 Battery negative Each accepts a 1/4 in. or
larger ring terminal
Fastener: Torx T30 screw,
M6 nut. Recommended
Torque: 4.5Nm +/-5%
+ 12/4.0 Battery positive
C1 20/0.5
Battery temperature
sense negative
Each is a 1/4 in. quick-con-
nect terminal.
C2 20/0.5
Battery temperature
sense positive
C3 20/0.5 Interlock Signal
1/4 in. quick-connect ter-
minal; normally closed to
battery positive. Open
when the charger output
is active. 1.5A max.
Table 3-12. IC900/IC1200 – DC Output
Pin
Recommended
Wire Size (AWG/
mm2)
Description Notes
-
12/4.0 (IC900) 10/
6.0 (IC1200-24V)
12/2.5 (IC1200-36V,
48V)
Battery negative Each accepts a 1/4 in. or
larger ring terminal
Fastener: Torx T30 screw, M6
nut.
Recommended Torque:
4.5Nm +/-5%
+ Battery positive
L1
22/0.5
(2-conductor cable)
Remote LED red
anode/green cath-
ode
Each is a 1/4 in. quick-con-
nect terminal. L2 goes high
with respect to L1 to light the
remote LED green, and vice
versa to light the remote LED
red.
L2
Remote LED green
anode/red cathode
C1
18/1.0 (2-conductor
cable)
Battery temperature
sense negative
Each is a 1/4 in. quick-con-
nect terminal. See Design
Guide for details.
C2
Battery temperature
sense positive
C3 12/4.0 Interlock Signal
1/4 in. quick-connect termi-
nal; normally closed to bat-
tery positive. Open when the
charger output is active.
F+
N/A
Fan power/control;
0-12 VDC (IC1200
only)
1/4 in. quick-connect termi-
nals
F-
Fan power/control
return; 0-12 VDC
(IC1200 only)