JF FCT King Size 1260, Инструкция по применению

Страница: 55 / 114

4. ADJUSTMENT
PIGB-206X-02 FCT1460 0614
- 55 -
Fig. 4-18 Under some conditions, crop substance (small particles) can accumulate in the
shaded area and get so compact that this may result in an overloading of the
transmission driving the rollers.
Check the area after every 8 hours of operation and remove possible crop residue.
Check, and if necessary adjust, the distance between scraper and smooth roller. The
checking frequency can be reduced when the operator knows the machine under all
conditions.
Fig. 4-19 Under the roller section a bottom plate B can be mounted as option. This plate can
be mounted when working in very dry and/or short crops to avoid waste under the
rollers.
IMPORTANT: When working under normal conditions we recommend you to
drive without this bottom plate as, otherwise, material can
accumulate under the rollers causing reduced capacity and
unnecessary overload of the transmission.
However, when driving in a crop where there is an excessive
waste under the rollers, the bottom plate should be mounted.
Waste material should be removed on a regular basis.
Fig. 4-18
P
R
1
1
-0
3
3
2
M
in.
0,5
mm
Fig. 4-19
P
R
1
1
-1
8
1
4
B