JF FCT King Size 1260, Инструкция по применению

Страница: 21 / 114

1. INTRODUCTION
PIGB-206X-02 FCT1460 0614
- 21 -
SAFETY DECALS
The safety decals shown on the previous page are positioned as shown on the drawings. Before using
the machine, check that all decals are present: if not, replace those missing. The decals have the
following meaning:
1. Stop the tractor engine and remove the ignition key before touching the machine.
Always remember to stop the tractor engine before lubricating, adjusting, maintaining or repairing. Also
remember to remove the ignition key to ensure that nobody starts the engine until you have finished.
2. Read the instruction manual and the safety instructions.
This is to remind you to read the delivered documents to ensure the machine is operated correctly and to
avoid unnecessary accidents and machine damage.
3. Children.
Never let children stand near the machine during operation. Especially not small children as they have a
tendency to do unforeseen things.
4. Chain drive
One or more chain drives are placed under this guard. Make sure that the tractor engine has stopped
before opening the guard.
5. Risk of cutting.
There is a risk of getting fingers etc. caught several places on the machine. Be careful when the machine
is connected to the tractor and ready to work. The machine can easily crush or cut off any part of the body
that might get caught in the machine.
6. Remember the guards when grinding.
Remember to close ALL guards before grinding.
7. Rotating parts.
After the PTO drive shaft has stopped, the blades will have a momentum where they keep rotating for up
to 2 minutes. Wait until the blades have come to a complete stop before removing guards for inspection or
maintenance.
8. Risk of getting pulled into the machine.
Do not stand near the attachments or the feed rollers while the machine is running. Make sure that the
tractor engine has stopped first.
9. The number and the direction of rotations.
Check that the PTO drive shaft runs with the right RPM and in the right direction. A wrong number of
rotations and/or direction of rotation can damage the machine with the risk of personal injury as a result.
10. The PTO drive shaft.
This decal has the purpose to remind you how dangerous the PTO drive shaft can be if it is not correctly
mounted or protected.
11. Auto hitch.
Always block the hydraulic hitch with the supplied pin before driving with a trailed wagon on public roads.
12. Maximum 210 bar.
Make sure that all the hydraulic components are not exposed to more pressure than 210 bar, as there
could be a risk of explosive damage of parts. Hereby you expose yourself and others to serious danger of
getting hit by metal parts with high speed or oil under high pressure.
13. PTO drive shaft for rotor.
There is an alternative pin for the PTO drive shaft for the rotor. It is used when the rotor is disconnected
during reverse and when the rotor rotates in the opposite direction during grinding. Make sure that you
place the PTO drive shaft correctly on the pin when performing these operations.
14. High-voltage lines.
This decal has the purpose to remind you of the danger of getting too close to high-voltage lines.
15. Hydraulic oil under pressure.
Warning against hydraulic oil under pressure.