JF FCT King Size 1260, Инструкция по применению

Страница: 69 / 114

5. METAL DETECTOR (MD)
PIGB-206X-02 FCT1460 0614
- 69 -
MD-CONTROL
Fig. 5-5 The control unit A which is placed under the left rear guard contains the necessary
controls for the metal detector. It receives a signal from the magnet tub and in case
of detection of ferrous metal it gives a signal to the coil to block the feed intake and to
the reverse function to go into neutral position. Furthermore it verifies, by means of
the magnet switch, whether the feed intake has reversed. When starting the
machine, the metal detector is active, and you need to reverse the feed intake before
you can work normally. See chapter 6 "STARTING IN THE FIELD".
The metal detector turns on each time the control unit is switched on.
Fig. 5-6 When the control unit is switched on and the metal detector is on, the two control
lights on the MD control unit and the light on the control box are on.
Fig. 5-6
Fig. 5-5