JF FCT King Size 1260, Инструкция по применению

Страница: 19 / 114

1. INTRODUCTION
PIGB-206X-02 FCT1460 0614
- 19 -
Fig. 1-4
MAINTENANCE
After approx. 2 days of operation, all bolts should be re-tightened. Always make sure
that the used spare parts are tightened to the correct torque.
When replacing parts in the hydraulic system always make sure that the pick-up rests
on the ground and/or the lifting cylinders are blocked.
Hydraulic hoses must be checked by an expert before use, and after that, a minimum
of once a year. If necessary, they must be replaced. The working life of hydraulic
hoses should not exceed 6 years, including maximum 2 years of storage.
When replacing, always use hoses which comply with the requirements stated by the
manufacturer. All hoses are marked with date of production.
REPLACEMENT OF WEARING PARTS
Blades, blade bolts and shear-bar are made of high-
alloyed, heat-treated materials. This heat treatment
provides especially hard and ductile material which is able
to withstand extreme stress. Damaged blades, blade bolts
or shear-bars must be replaced by original JF spare parts
only to ensure safe operation.
Blades and blade bolts must be checked every day during
the season.
The special blade bolts must be tightened with a torque
wrench to 40 kgm.
When the blades are worn out; max. 8 mm or approx. 12
mm above the straight piece, they must be replaced (see
fig. 1-4).
After replacement of blades, blade bolts and the like, check that no tools have been
left in the machine.