![background image](http://html1.mh-extra.com/html/jcm/g-3000r/g-3000r_owners-manual_640221057.webp)
57
9.27
PLU DESCRIPTIONS
On PLUs it is possible to program 12, 20 or 15 characters for description for every
PLU, depending on the configuration of memory.
PROGRAMMTION
To repeat for several PLU's codes
P
(CCC...C)
PLU
X
(YY..Y)
X
PLU
#
KEY
only if description inferior to 12,20 or 15 character
CCC...C :
PLU code (Max. 12 digits,
in case of inner codes or "scale" see Par. 9.56
)
YYY...Y :
description to insert by using the function of input alphabetical characters
(12, 20 or 15 characters).
Note
:
F
in order to cancel the last character input it is necessary to press the "E.C.”
key
F
in order to obtain the characters in double width it is necessary to press
the key, (decimal point) before the characters to program
F
in order to obtain the small characters it is necessary to press the "R.M."
key before the characters to program
F
the space corresponds to the key "00" (double zero).
F
The sequence (CCC... C)
PLU can be replaced from the reading by
scanner of the bar code of the product or from the pression of hard PLU key
9.28
PLU PRICE CHANGING
to repeat for several PLU codes
P (PLU code) PLU (P P ... P) PLU #
PP...P
:
PLU's price (8 digits)
Note :
These variations influence, PLU's reports.
The sequence (cod. PLU) PLU can be replaced from the reading through
scanner of the bar code of the product or from the pression of hard PLU key
9.29
PLU DELETTING
to repeat for several PLU codes
P (PLU code) PLU VOID #
Note :
This operation is possible only after to have executed a daily PLU selling reset
and eventually a PLU Stock reset ; it influences obviously all the PLU's reports.
The sequence (CCC... C)
PLU can be replaced from the reading by
scanner of the bar code of the product or from the pression of the hard PLU key
KEY
KEY