![background image](http://html1.mh-extra.com/html/jcm/g-3000r/g-3000r_owners-manual_640221034.webp)
34
9.2 STATUS SYSTEM
This programming is very important and is fundamental for all the way of
operation of ECR.
It exists 15 Status that are 15 groups of various each status will come called "Status
1,Status 2...,Status 15"; the meant one of the aforesaid Status is explained in the
successive pages while the general procedure of programming is following:
to repeat for various Status
P (NNN) X (per) (A B C D E F G H) SUB-TOTAL #
NNN
= Status System number ( 551 = S.S.1,........., 559= S.S.9,
560 = S.S.10, 561 = S.S.11,........., 565 = S.S.15)
A, B, ... H
= 0 or 1, depending from the setting needed
Note :
It is possible to program also one Bit's status for time ; inserting 2 it will not come
modified the setting previously done on the bit of the Status in object, in this way
it will be possible to change a Status setting without to modify all the others Bits
pertaining to the same Status System.
This S.S. is automatic set by ECR at ALL-CLEAR reset execution.
STATUS SYSTEM 1
( 551 -- X -- ABCDEFGH -- SUB-TOT.)
A : 0 = X and Z reports are zero skipped
1 = X and Z reports aren't zero skipped
B : 0 = Sales composition rate isn't printed on hourly sales report
1 = Sales composition rate is printed on hourly sales report
C : 0 = Sales composition rate isn't printed on department report
1 = Sales composition rate is printed on department report
D : 0 = Receipt "TOTAL" line printed with normal height
1 = Receipt "TOTAL" line printed with double height
E : 0 = VAT data not printed automatically (only by VAT print key) on receipt
1 = VAT data printed automatically on receipt
F : 0 = Normal double receipt
1 = Ticketing double receipt
G : 0 = Item counter not printed on receipt
1 = Item counter printed on receipt
H : 0 = Transaction data not printed on daily full terminal report
1 = Transaction data printed on daily full terminal report