![background image](http://html1.mh-extra.com/html/jcm/g-3000r/g-3000r_owners-manual_640221168.webp)
168
15.8
TABLE SCROLLING ON HELP DISPLAY
REGISTRATION E.C.
On G-556 it's possible to install like option a display positionned immediately above
the keyboard. Such display, defined like Help Display, can visualize two lines of 20
characters and turns out very useful, beyond than for the execution of the programmings
and the reports, also for the executions of the operations on the Tables, since it allows to
slide the content of a table in order to verify the executed registrations, and eventually to
delete one registration previously executed.
- To input the number of the Table that is wished to open, from 1 to 999.
- To press the TABLE Number key.
- The Help Display if installed, will visualize the first recording executed on the Table.
- With the Ahead line "
á
" and Behind Line "
â
" keys it will be possible to be slid all
the lines of the registrations executed on the Table.
- Reached to the line that is desired to remove from the Table to press E.C. key, on
the Help Display will appear the indication "X VOIDED" (where "X" is the number
of the Table's line) to indicate that the line has been removed from the Table.
- To press the TABLE Number key again to suspend the Table.
It won't be possible to execute E.C. of a registration by the operation described in the case
in which after the registration line that is wished to cancel it has been executed one variation
(%, +, -) ; this because it would remain the variation not reported more to the registration
to which the same variation was tied. So trying to cancel a registration followed from a
variation the ECR will signal the impossibility to execute such cancellation ; it must have
therefore, in case that it's necessary to execute an operation of this type, to cancel before
the registration line containing the variation (%, +, -) and subsequently you'll be able to
delete by E.C. operation, the registration line wished.
The above described procedure can be activated also in case of callback of the Table
for the Table closing (sees Par.15.3), with the difference that at the end won't be possible
to press the TABLE Number key in order to suspend the Table, but the operation must be
closed obbligatory by a Total of closing.
It's very important to consider that, in case of Kitchen Printers are connected to G-556,
the E.C. operation executed by the operation above indicated, won't be sent to Kitchen
Printers, so the information will be lost. It will have, in this case, to execute the registrations
cancellation by the use of VOID key, in this way the information will be sent to the Kitchen
printers ; also in this case it'll be possible to use the scrolling function of the Table's
registrations, but once individuated the registration line to remove not to press E.C. key
in direct way but to execute the operation by the VOID key with the operation here following
described :
- To press the VOID key.
- To input the amount of the registration to eliminate and to press the relative
Department, or to input the code of the PLU to eliminate and to press the PLU key,
or if on the Department there is a programmed price to press directly the key of the
Department in object after the pressing of the VOID key.
- To continue with other operations.