![background image](http://html1.mh-extra.com/html/jcm/g-3000r/g-3000r_owners-manual_640221178.webp)
178
It's possible to visualize on display the data of the internal PLU (programmed on the
ECR's memory) also during the receipt execution, without therefore the receipt must be
close to being able to set the ECR in S mode. By the following described procedure it
will be possibille to visualize on ECR's display the description and the price of the wished
PLU.
In order to activate the function of internal PLU control to execute :
-
During a receipt.
-
To press the PLU INFO key.
-
Call the PLU code by :
(NNN..N) PLU NNN..N
= PLU code
Note :
The sequence (NNN... N) PLU can be replaced from the reading through
scanner of the product's bar-code or from the pressing of direct PLU key
-
On the ECR's display it will be visualized the description and the selling price of
the PLU.
-
To continue with the successive registrations.
16.5
VISUALIZATION of the DATA of EXTERNAL PLU (on PC or Mem.box)
It's possible to visualize on display also the data of the external PLU (residents on
the PC or on the memory box) and the bar-codes read with the scanner ; this function comes
activated also in this case from the S mode (cannot be visualized the data of external
PB).
In order to activate the function of control of internal PLU to execute :
(0)
directly from the Reg. mode, it will be obviously necessary that there aren't open receipts
(the function S does not have secrets codes for the activation).
VERIFICATION OF EXTERNAL PLU DATA:
After to have executed the above described operation to continue as following :
-- OPERATION --
-- DISPLAY --
1) (NNN..N) PLU NNN..N= PLU code 4901201202155
Note:
The sequence (NNN... N) PLU can be replaced from the reading through
scanner of the product's bar-code or from the pressing of direct PLU key
2) PLU PLU description COKE
3) PLU Department description DRINKS
4) PLU PLU price 850
Note:
if the PLU doesn't exist on memory, the point 2 execution will cause an ERROR.