167
15.4 CANCELLATION OF A TABLE MEMORIZED WITHOUT THE PRINTING OF THE
DOCUMENT
It's possible on G-556 to cancel a Table without to execute the printing of thedocument,
this operation could be executed in case of an error executed from the clerk or in case of
the change of mind by the customer.
The Table correction will immediately release the table to which the registrations had
been reported and does not introduce any data in the ECR's totalizers.
- To input the number of the Table for which it is desired to cancel the memorized
data, from 1 to 999.
- Press the TABLE Number key.
- Press the Receipt Void key.
- On the ECR's display will appear the “OK" message, like request for confirmation
of the operation that is being to be executed.
- To press the Receipt Void key againn in order to confirm the cancellation of the
Table, or to press the CL key in order to abort the operation and to continue with
the registrations on the Table.
15.5
DATA CONTAINED IN THE TABLE PRINTING
It's possible to execute the data contained in the Table printing without to delete the
content of the same Table ; this procedure has been thought to give the possibility to control
the Table situation at any time without to print the document.
- To input the Table number for which it is desired to print the data, from 1 to 999.
- To press the TABLE Number key.
- To press the TABLE Number key newly in order to start the printing of the data
registered on the Table, the data will be printed inside of one NOT SELLING receipt.
15.6
CLOSING/SUSPENSION OF A TABLE OPEN BY MISTAKE
It's possible to close or to suspend again a table, without to execute no registrations,
in case as for example the opened Table is not that intentional one.
- To input the Table number that is wished to open, from 1 to 999.
- To press the TABLE Number key.
- If the Table opened is not that intentional one, to press the 0 (zero) key.
- To press the TABLE Number key newly.
In this way the Table will be closed or suspended without doesn't modify absolutely not any
data of its content.
15.7
VISUALIZATION ON DISPLAY OF THE OCCUPIED TABLES
It's possible to visualize on display the tables occupied directly in R position.
- To press the TABLE Number key.
- The display will visualize the message.
- To press the key "
é
" (ahead line), the display will visualize the number of the first
occupied table, to continue with the pressing of the key "
é
"(ahead line) in order to
visualize in succession the number (code) of all the occupied tables.
- After the last occupied table, at the pressing of the key "
é
" (ahead line), the display
will visualize "FINE", to press the "CL" key at anytime in order to exit.