33
In order to personalize the keyboard is necessary to follow the procedure of positioning:
to repeat for the each Character/Keys
P
(9 8)
X (for) (CC)
Key
#/NS
Press the R.M. key in order to pass from
R.M.
the insertion of capital characters or small
characters and viceversa
CC
:
Code Character (two figures, you see above table)
Key
:
Key where it is desired to place the Character
9.1.6 SPECIAL FUNCTIONS IN ALPHABETICAL MODE INPUT
In the modality of input alphabetical characters :
A.
the "E.C." key cancels last character input;
B.
the "R.M." key activates the printing of the successive characters in small mode ("a",
"b", "c"....) the second pressure of the same key (R.M.), release the printing in small
mode and allows to return to the printing of the characters in capital;
C.
the 0 key corresponds to "space" (in the characters insertion modality by
alphanumeric keyboard only and not in case of characters insertion by numerical
code; in this last case the space is obtained pressing for two times the key "0" );
D.
the "." key (decimal point) activates the printing of the character in double horizontal
width. The pressure of the key "." is valid for all the characters following until the
successive pressure of the key ".", so in order to print more characters in modality
"double width", it will be necessary to lower the key "." before the first character (Eg.:
BEER = BEER);
E.
the "X/Time" key (multiplication) allows to pass from the modality of insertion of the
characters by alphanumeric keyboard to inserion of the characters by numerical
code and vice versa;
F.
above described commands can be used also in "combined " mode, therefore, if as
an example he desires to insert of the characters in double horizontal width and in
double width it is sufficient to lower the key "." (decimal point) and the key "R.M."
before the insertion of the characters of the description to program.