87
9.67
THERMAL HEAD ENERGIZING TIME PROGRAMMING
With the following setting it is possible to define the printing intensity of thermal
printing. Increasing the intensity, obviously, the printing speed will be lower and
decreasing the intensity of printing, instead, the speed will come automatically increased.
Using particularly high printing intensity, it is possible that the printer emits also a light
"noise"; in order to eliminate such noisiness, to decrease the intensity of printing.
With a little time and some tests the best compromise for the optimization of the
printing will be reached.
P (68) X/Time (PP) SUB-TOTAL #
PP
:
thermal head energizing time adjust code (from 00 to 40, default = 28).
Note : to use low values for low printing intensities and high printing speeds, to use high
values for high printing intensity and lower printing speeds.
9.68
CID#1 WARNING AMOUNT PROGRAMMING
The following setting is used to define the limit of the value of the CASH in Drawer
N.1 after which it must come activated from the ECR a warning message.
P (421) X/Time (NNN...N) SUB-TOTAL #
NNN...N: value of activation of the warning message (max 9999999999)
9.69
CID#2 WARNING AMOUNT PROGRAMMING
The following setting is used to define the limit of the value of the CASH in Drawer
N.2 after which it must come activated from the ECR a warning message.
P
(422)
X/Time
(NNN...N)
SUB-TOTAL
#
NNN...N: value of activation of the warning message (max 9999999999)
9.70
F/C WARNING AMOUNT PROGRAMMING
The following setting is used to define the limit of the Foreign Currency after which
it must come activated from the ECR a warning message.
P
(423)
X/Time
(NNN...N)
SUB-TOTAL
#
NNN...N: value of activation of the warning message (max 9999999999)
KEY
KEY
KEY
KEY