![background image](http://html1.mh-extra.com/html/jcm/g-3000r/g-3000r_owners-manual_640221042.webp)
42
9.3
PASSWORD PROGRAMMING
It is possible to set the password of P mode, X mode and Z mode when the ECR is
worked Key mode by code and Key (Status System 11A = 0).
In this way it will be possible to limit the use of the program or report operations to
people authorized to their execution, diversifying also the levels of qualification.
It exists a code defined like "PASSWORD" that can set up by the following program,
by the use of this code it will be possible to execute relative operations.
9.3.1 PASSWORD PROGRAMMING (Key in "PRG")
P
(3N)
X (ABCDEF) SUB-TOTAL
(ABCDEF) SUB-TOTAL
#
The first and second formulation of the PASSWORD code, must to be equal in order
to make that the programming of the code comes accepted from the ECR. During
inputing the PASSWORD code, it does not come neither visualized nor printed from
the ECR for security reasons.
PASSWORD PROGRAM CODE
N = 7: PASSWORD program code of P mode
N = 8: PASSWORD program code of X mode
N = 9: PASSWORD program code of Z mode
ABCDEF = PASSWORD (It isn't necessary to insert all and the six figures ABCDEF)
Default:
PASSWORD of P mode is 1.
PASSWORD of X mode is 2.
PASSWORD of Z mode is 3.
9.3.2 PASSWORD USING
PASSWORD use in P mode:
(4) --- "KEY " --- (P PASSWORD) ---"KEY"
PASSWORD use in X mode:
(2) --- "KEY " --- (X PASSWORD) ---"KEY"
PASSWORD use in Z mode:
(3) --- "KEY " --- (Z PASSWORD) ---"KEY"
9.3.3 PASSWORD CANCEL
The PASSWORD may be cancel by set to it's default.