65
9.42
STORE/BOTTOM (COURTESY MESSAGE) PROGRAMMING
(plus messages lines and lines between messages programming)
It's possible to program until 8 lines of 28 characters, 5 for STORE message and 3
to the end of the receipt like "courtesy message". It will be moreover possible to define,
through the following programming, how many lines are used for the STORE message and
how many for the courtesy message, it's possible also to define the number of lines between
the STORE/HALLO LOGO and the receipt data printing :
P (5) X/Time (AB CD RM) SUB-TOTAL #
A
:
number of white lines of advance before (above) of the programmabile
graphical STORE LOGO (from 0 to 9). Default: 0.
B
:
number of white lines of advance after (below) of the programmabile
graphical STORE LOGO (from 0 to 9). Default: 3.
C
:
number of white lines of advance before (above) of HALLO LOGO (fix
LOGO), (from 0 to 9). Default: 3.
D
:
number of white lines of advance after (below) of HALLO LOGO (fix
LOGO), (from 0 to 9). Default: 0.
R:
number of lines for Store message (from 0 to 5). Default: 5.
M
:
number of lines for "courtesy message" (from 0 to 3). Default: 0.
At this point, in order to program the characters of each line, follow the procedure under
described here :
to repeat for the several lines
P (1 A) X/Time (Y Y Y ..... Y Y) SUB-TOTAL #
28 characters
A
:
= 1 or = 2... or = 5 depending from the line of STORE message
= 6 for the first line of the courtesy message or = 7 for second line or
= 8 for third line of the courtesy message
YY..Y
: heading to input by using the function of alphabetical characters
input.
Note :
F
in order to cancel last character input press "E.C." key
F
in order to obtain a line to double height, press "000" key (triple zero)
immediately before to input the characters of the line to program
F
in order to obtain the characters in double width press the key "." (decimal
point) immediately before the characters to program
F
in order to obtain the small characters press the "R.M." key immediateley
before the characters to program
F
the space corresponds to "00" key (double zero)
F
like default the ECR uses three white lines after STORE LOGO printing and
three white lines before HALLO LOGO printing
KEY
KEY