CET s.r.l.
Vers. 1.2
LCM 61
Pag. 1
CET
VISUALIZED DIGITAL
COUNTER WITH ONE
SET POINT
Type:
LCM61
VISUALIZED DIGITAL 6 DIGITS COUNTER, WITH
INPUT FOR SINGLE DIRECTIONAL COUNTS, ONE
SET POINT OF INTERVENTION AND IMPULSES
TOTALIZER.
The LCM 61 counter finds application where there is the
necessity to visualize and to control, through one
programmable set point, mono-directional counts
deriving from electromechanical and logical contacts,
proximity and encoder.
MAIN FEATURES
PROGRAMMABLE PARAMETERS
•
Frontal keyboard in polycarbonate (antiscratch, antioil,
antacid).
•
IP65 protection degree
•
Accessible parameters with key software
•
Removable terminals connection.
•
Execution DIN 48 x 96.
•
Recessed assembly.
•
Special retaining brackets.
•
One set points
•
Reset time
•
2 conversion factors of the impulses
•
Input (Slow / Fast)
•
Count (Up / Down / Superior)
•
Memory
•
Reset key
•
Decimal Point
TECHNICAL FEATURES
•
POWER SUPPLY IN ALTERNATE CURRENT
•
POWER SUPPLY IN DIRECT CURRENT
•
POWER SUPPLY TOLERANCE
•
ABSORPTION
•
OPERATING TEMPERATURE
•
CLIMATIC CONDITIONS
•
COUNTER AND TOTALIZER VISUALIZATION
•
MULTIPLICATION FACTOR M1 OF THE INPULSES IN INPUT
•
MULTIPLICATION FACTOR M2 OF THE INPULSES IN INPUT
•
INPUT TYPE
•
COUNT FREQUENCY FOR LOGICAL SIGNALS
•
MINIMUM TIME FOR COUNT IMPULSES
•
CUT FREQUENCY FOR ELECTROMECHANICAL INPUTS
•
AUXILIARY INPUTS POWER SUPPLY
•
COMMAND IMPUTS
•
OUTPUTS
•
RELAY RESET
•
PROGRAMMED DATA MEMORY
:
Single power 24 - 110 - 230 Vac (50 / 60 Hz).
:
Single power 24 Vdc
:
+10% - 15%.
:
2 W - 3 VA.
:
-5 °C + 55 °C.
:
U.R. 95 % at 40 °C (without condensate).
:
6 digits, 14mm high
:
Programmable from 0,00001 to 9,9999.
:
Programmable from 1 to 99.
:
Suitable for electromechanical contact and NPN or PNP
signals
:
Up to 15 KHz with Duty Cycle=50%.
:
0,25 mSec.
:
About 30 Hz.
:
24 Vdc - 80 mA available on terminals.
:
1 Counter Reset - 1 Inhibit.
:
1 relay with operating contacts - capacity 2A - 250Vac.
:
Manual or automatic with excitation time from 0,1 to 99,9
sec.
:
static (no battery)
