JBG2 R290, Руководство по эксплуатации, Страница: 61 / 64

59
Self-contained refrigerating and freezing devices - Instruction manual 59
© JBG- 2 (v. 1 . 1 ) English
12.5.2 Setting the operating temperature
Follow the instructions below to bring up or program a set point :
 press the
SET
button for more than 2 second to bring up a set point,
 use the UP or DOWN buttons to increase or decrease the set point as
appropriate to set its desired value,
 press the SET button again or wait 10 seconds to confirm the entered value.
12.5.3 Manual defrosting
In order to turn on manual defrosting, press the DEF button for over 2 sec.
12.5.4 Alarms
 Chamber sensor failure P1

Evaporator sensor failure P2
 Maximum temperature alarm HA
 Minimum temperature alarm
L
A
 Critical Alert CA
 Real- time clock parameter error
rtC
 Real- time clock failure rtF
58 Self-contained refrigerating and freezing devices - Instruction manual
English © JBG- 2 (v. 1 . 1 )
12.5 XRi77CX DIXELL controller
12.5.1 Display and key functions
Symbol Function
Preview of the current parameter map. In programming mode, change the
parameter or confirm.
Preview of the current parameter map. Changing a parameter in programming
mode. Holding for five seconds changes the parameter map.
Turns the device on/off.
Shows the current setting. Selecting and confirming a parameter in programming
mode.
Activates manual defrosting.
Lighting output control.
Symbol Legend Symbol Legend
Lighting output status Energy- saving mode status
Compressor/cooling operation
status
Status of the Pull Down process
Operating parameters of fans Alarm signalling
Status of defrosting process Current unit
AUX output status