JBG2 R290, Руководство по эксплуатации, Страница: 55 / 64

53
Self-contained refrigerating and freezing devices - Instruction manual 53
© JBG- 2 (v. 1 . 1 ) English
12.1.2 Setting temperature (SET)
 press UP and DOWN simultaneously

the flashing number indicates the set value (SET)
 use UP and DOWN to set the SET value
 after 30 seconds the controller returns to the function of reading the current
temperature
12.1.3 Changing parameters
 press and hold UP and DOWN simultaneously for 5 seconds to enter the
MENU

press UP and DOWN to select the desired MENU folder
 press OK to select MENU folder

press UP and DOWN to select the desired parameter
 press OK to select the parameter

press UP and DOWN to change the parame ter value
 press BACK to return to the parameter/folder
12.1.4 Manual defrosting
 nacisnąć i przytrzymać przycisk DEF przez 5 sekund
12.1.5 Alarm confirmation
 press any of the buttons to confirm the alarm
12.2 CAREL PJEZ controller
12.2.1 Display and key functions
Symbol Function
During normal operation of the controller: pressing and holding for over 3 sec.
is going to change the ON/OFF operating status of the controller, pressed
simultaneously with the DOWN button for over 3 sec. will activate or deactivate the
continuous operation function (when pressed, the screen will
show the “CC”
symbols).
In Parameter setting mode: allows you to move to further setting parameters.
52 Self-contained refrigerating and freezing devices - Instruction manual
English © JBG- 2 (v. 1 . 1 )
12. CONTROLLER INSTRUCTION MANUAL
Provided below are the basic instructions for the standard controllers. In the case
a different controller is provided in the device, the operating instructions should be
downloaded from the manufacturer’s website; alternatively, please contact the
service department.
12.1 ERC112C (ERC113C) controller
12.1.1 Display and key functions
Symbol Function
Temperature setting, selection/change of folder/parameter.
Temperature setting, selection/change of folder/parameter.
Access to the set function (DEF), BACK in MENU.
Access to the set function, OK to enter the MENU.
Symbol
Legend
Symbol
Legend
Energy- saving operation Operating parameters of fans
Cooling / compressor operation Alarm signalling
Defrost mode