JBG2 R290, Руководство по эксплуатации, Страница: 34 / 64

32
32 Self-contained refrigerating and freezing devices - Instruction manual
English © JBG- 2 (v. 1 . 1 )
1. INTRODUCTION
The device is filled with Group A3 refrigerant, which is flammable and
explosive. Before operating the device, please read the operating instructions
carefully and adhere to all the safety rules. Failure to comply with the
instructions may lead to malfunction of the device, breakdown, and may cause
serious injury or death and/or damage to property.
The manual contains the principles for handling the product prior to the initial
commissioning and during daily use.
Descriptions of situations which require particular attention are highlighted i n the
manual.
Failure to follow the instructions may cause irreparable damage to the product.
The manual is an integral part of the equipment and should be delivered to the user
together with the equipment. This manual should be stored for future reference.
In the event that the equipment is resold or otherwise transferred to another party,
this manual must be delivered as well.
In the event of detecting damage during transport – do not connect the device to
the mains and immediately contact a service technician.
The device must be used in accordance with the purpose for which it has been
designed.
Protect the unit against contact with water or other liquids. If the unit is flooded,
immediately disconnect the unit from the mains and have the unit checked by
a specialist.
Check that the electrical connections are correct and that earthing is effective
before connecting the device. The terminal for the connection of earthing wires is
marked with the protective earthing symbol and is located on the rear of the
unit
frame.
Check the condition of the power cable. If the non - removable power supply cable
becomes damaged, it should be replaced by the manufacturer or a service
technician or by a qualified person in order to avoid danger.
Protect the power cord from contact with sharp or hot objects.
The circuit breaker for the device’s electrical supply system must be easily
accessible.
The unit must be disconnected from power supply when not in use and during
cleaning.
Switch off the unit at the unit’s main switch before physically disconnecting the unit
from the mains power supply.
Note! The device remains live until it is disconnected from the power source.