Jay electronique RS Series Скачать руководство пользователя страница 38

Страница: 38 / 49

Doc ref. :

332190D –

28.04.2014

Page 38 / 49

9 Warranty

All our devices are guarantied 2 years as of the date of manufacture indicated on the product (except for the

enabling handle battery which has 1 year warranty).

No repair, modification or replacement of a product during the

warranty period can be understood as an extension of the warranty period.

Limits of warranty:

The warranty does not cover defects resulting from:

• Transport,

• False manoeuver or non-observance of connection diagrams when setting the equipment into service,

• Insufficient supervision or servicing, utilization not complying with the specifications detailed in the technical manual

and, as a general rule, storage, operation or environment conditions (atmospheric, chemical, electrical or other

conditions).

• Conditions not specified on order of the equipment.

The warranty shall not apply subsequent to any modifications or additions to the equipment performed by the

customer without written approval by JAYElectronique.

The JAY Electronique responsibility during the warranty period is limited to material and construction defects. This

warranty comprises repair in the JAY Electronique workshops or replacement, free of charge, of parts recognized to

be defective following expert inspection by the JAY Electronique Technical Department.

The warranty shall not give rise to any compensation for damage claims.

Any disputes relative to a supply or settlement thereof shall be ruled by the COURT OF COMMERCE OF

GRENOBLE, solely competent, even in the event of an Appeal or a plurality of defendants.

Содержание RS Series


















































Результаты поиска

Содержание RS Series

Отзывы:

Похожие инструкции для RS Series

Бренды по названию

Популярные бренды

Jay electronique RS Series, Инструкция по установке и эксплуатации

Результаты поиска

Содержание RS Series

Отзывы:

Похожие инструкции для RS Series

Бренды по названию

Популярные бренды