Doc ref. :
332190D –
EN
28.04.2014
Page 5 / 49
1 Safety rules and general safety guidelines
Under the terms of the European Machinery Directives, the wireless enabling handle is understood as a control
unit and as a safety component used to stop a system. All applicable safety rules must be observed when
installing and using the wireless enabling handle.
The instructions given in this manual must be observed to ensure safe use of the wireless enabling handle.
The unit must only be used by appropriately trained operators qualified to use the product.
The operator must have uninterrupted visibility of the manoeuvre which he is controlling with the enabling handle.
The wireless enabling handle should never be left unattended in any random location.
The location of the charger RSCP must be clear of any obstructions that prevent the reload of the wireless
enabling handle. The load will be carried out inside, in a dry place (protection against moisture IP 20).
If several wireless enabling handles are used on the same site, they should be configured with different radio
frequencies spaced by at least two channels (for example, channels 5, 7, 9 ...) or by five channels when several
systems are being used within a radius of 10 meters.
In the event of a malfunction, immediately stop the installation by fully pressing and releasing the trigger on the
enabling handle.
The enabling handle is designed to meet the requirements of Machinery Directive 2006-42 on the basis of the
following standards:
•
EN ISO 13849-1 (2008) for the performance level e (Category 4)
•
EN 61508-1-7 (2001) for SIL 3
The enabling handle is equipped with a system detecting it on its charger which inhibits operation of the equipment
if the handle is not placed on its charger after it has been used.
2 Product identification data
The "RADIOSAFE wireless enabling handle" comprises :
The wireless enabling handle :
RSEP4B-*
(trigger with 2
positions) or ref
RSEP41-*
(trigger with 3 positions) supplied
with :
o
A battery
o
A handle configuration software
o
The installation and user manual (CD)
A charger, ref. :
RSCP-*
A radio receiver, ref. :
RSRB*400-*
supplied with :
o
A SIM card
o
A ¼ wave antenna, ref. :
VUB084
o
A BNC elbow connector, ref. :
VUB060
o
A 50 cm antenna extender, ref. :
VUB170
