janitza UMG 96S, Руководство по эксплуатации

Страница: 79 / 96

Page 79
Addr. Description Setting range Type Unit Presettin.
600 Current transformer, primary
6)
1 .. 10000 INT A 5
601 Current transformer, secondary
6)
1 .. 5 INT A 5
602 Voltage transformer, primary
6)
100 .. 60000 INT V 400
4)
603 Voltage transformer, secondary
6)
100 .. 400 INT V 400
4)
604 Indication profile, actual
5)
STRING1 - -
605 Indication rotation profile, actual
5)
STRING1 - -
700 Date and time
5)
STRING2 - -
701 Option clock, yes=1, no= 0 read only CHAR - -
702 Ring buffer, Data set number, address read only INT - -
703 Option Ringpuffer, ja=1, nein= 0 read only CHAR - -
800 Write in EEPROM 0 .. 4 CHAR - 0
Bit 1 = 1, Write calibration data.
Bit 2 = 1, Write programming data.
Bit 4 = 1, Write counter.
Bit 8 = 1, Write min./max. values.
911 Serial number read only LONG - ######
913 Software Release read only INT - ###
914 Hardware Expansion read only INT - ###
Parameter list Part 3
1)
0 = OR, 1 = AND
2)
0 = not inverted, 1 = inverted
3)
0 = 5Sec., 1 = 10Sec., 2 = 30Sec., 3 = 60Sec., 4 = 300Sec., 5 = 480Sec., 6 = 900Sec.
4)
In 300V standard version: 400V; In 150V special version: 100V.
5)
These values can only be read and written with GridVis.
6)
The parameters for current and voltage transformer ratios can be read at UMG96S only.
Attention!
For some parameters, only software GridVis can use the full setting range. At UMG96S, only
values up to 999999 can be set.
m