UMG 96-PA / UMG 96-PA-MID / UMG 96-PA-MID+
www.janitza.de
12
3.1 Incoming goods inspection
Safe and trouble-free operation of this device and
its components presupposes proper transport,
proper storage, set-up and assembly as well as
operation and maintenance in addition to com-
pliance with the safety information and warning
notices.
Exercise due caution when unpacking and pack-
ing the device, do not use force and only use
suitable tools.
Check the devices for flawless mechanical condi-
tion by visual inspection.
Please check the scope of delivery for complete-
ness before you start installing the device.
If it can be assumed that safe operation is no
longer possible, the device must be taken out
of operation immediately and secured against
unintentional start-up. It can be assumed that safe
operation is no longer possible if the device, for
example:
·has visible damages,
·no longer functions despite an intact power
supply,
·was subjected to extended periods of unfavor-
able conditions (e.g. storage outside of the per-
missible climate thresholds without adjustment
to the room climate, condensation, etc.) or trans-
port stress (e.g. falling from an elevated position,
even without visible external damage, etc.).
3.2 EU conformity declaration
Please see the EU declaration of conformity post-
ed at www.janitza.de for the laws, standards and
directives applied by Janitza electronics GmbH for
the devices. The CE conformity marking require-
ments for the device arise from the EU conformity
declaration and the laws, standards and directives
mentioned therein.
3. Product description
3.3 Intended use
The device is:
·Intended for installation in switchboard cabinets
and small installation distributors.
·Not intended for installation in vehicles! Use of
the device in non-stationary equipment consti-
tutes an exceptional environmental condition
and is only permissible by special agreement.
·Not intended for installation in environments with
harmful oils, acids, gases, vapors, dusts, radia-
tion, etc.
·Designed as an interior meter.
NOTE
All screw terminals included in the scope of deliv-
ery are attached to the device.
NOTE
All supplied options and design variants are de-
scribed on the delivery note.
CAUTION
Risk of injury due to fire or burns!
The battery used in the device may cause fire or
burns if used improperly.
·
Only replace the battery with the same type
or types recommended by Janitza!
·
Observe the polarity when installing the
battery!
·
Remove batteries only with non-conductive
tools (e.g. plastic tweezers)!
·
Do not recharge, disassemble, burn or heat
batteries above 100 °C (212 °F)!
·
Do not dispose of batteries with household
waste! Follow the disposal instructions in
the respective device documentation!
·
Keep batteries away from children and
animals!
·
In case of damage, return devices with a
soldered battery to the manufacturer, ob-
serving proper transport conditions!
The following apply for the battery used in the
device:
