www.janitza.de
11
UMG 96-PA / UMG 96-PA-MID / UMG 96-PA-MID+
WARNING
Risk of injury due to electrical voltage!
Severe bodily injury or death can result! Therefore
please abide by the following:
·
Switch off your installation before commenc-
ing work! Secure it against being switched
on! Check to be sure it is de-energized!
Ground and short circuit! Cover or block off
adjacent live parts!
·
During operation and troubleshooting (espe-
cially with DIN rail devices), check the envi-
ronment for dangerous voltages and switch
these off if necessary!
·
Wear protective clothing and protective
equipment in accordance with applicable
guidelines when working on electrical sys-
tems!
·
Before making connections to the device/the
component, ground the device by means of
the ground wire connection, if present.
·
Do not touching bare or stripped leads that
are energized! Equip stranded conductors
with wire ferrules!
·
Hazardous voltages can be present in all cir-
cuitry parts that are connected to the power
supply.
·
Protect the supply voltage with a suitable
line circuit breaker/fuse!
·
Never switch off, remove or tamper with
safety devices!
·
There can still be hazardous voltages pres-
ent in the device or in the component even
after it has been disconnected from the
supply voltage (capacitor storage).
·
Do not operate equipment with current
transformer circuits when open.
·
Only connect screw terminals with the same
number of poles and design!
·
Do not exceed the limit values specified in
the user manual and on the rating plate; this
must also be observed during testing and
commissioning.
·
Take note of the safety and warning notices
in the documents that belong to the device!
WARNING
Warning against unauthorized manipulation or
improper use of the device or its components!
Opening, dismantling or unauthorized manipula-
tion of the device and its components which goes
beyond the mechanical, electrical or other operat-
ing limits indicated can lead to material damage or
injury, up to and including death.
·
Only electrically qualified personnel are
permitted to work on the devices and their
components, assemblies, systems and cur-
rent circuits.
·
Always use your device or component only
in the manner described in the associated
documentation.
·
If there is discernable damage, send the
device or the component back to the manu-
facturer!
2.3 Safety measures
When operating electric devices, it is unavoid-
able for certain parts of these devices to conduct
hazardous voltage. Consequently, severe bodily
injury or material damage can occur if they are not
handled properly:
2.4 Qualified personnel
To avoid bodily injury and material damage, only
electrically qualified personnel are permitted to
work on the devices and their components, mod-
ules, assemblies, systems and current circuits
who have knowledge of:
·the national and international accident preven-
tion regulations,
·safety technology standards,
·installation, commissioning, operation, discon-
nection, grounding and marking of electrical
equipment,
·the requirements concerning personal protective
equipment.
Electrically qualified persons within the scope of
the technical safety information of all documents
associated with the device and its components
are persons who can furnish proof of qualification
as an electrically skilled person.
2.5 Warranty in the event of damage
Any unauthorized tampering with or use of the
device constitutes "misuse" and/or "negligence"
under the product’s warranty and thus voids the
warranty of any possible resulting damage. In this
regard, please take note of chap. „3.3 Intended
use“ on page 12.
