UMG 96-PA / UMG 96-PA-MID / UMG 96-PA-MID+
www.janitza.de
8
1.1 Disclaimer
Compliance with the usage information for the
devices is a prerequisite for safe operation and
attaining the stated performance characteristics
and product features.
Janitza electronics GmbH assumes no liability for
bodily injury, material damage or financial losses
which result from disregard of the usage informa-
tion.
Make sure that your usage information is readily
available and legible.
1.2 Copyright notice
© 2019 - Janitza electronics GmbH - Lahnau. All
rights reserved.
Any reproduction, processing, distribution or other
use, in whole or in part, is prohibited.
All trademarks and the rights arising from them
are the property of the respective owners of these
rights.
1.3 Technical changes
·Make sure that your device matches the user
manual.
·This user manual applies to the UMG 96-PA,
UMG 96-PA-MID and UMG 96-PA-MID+. Sepa-
rate validities and distinctions are marked.
·First make sure you have read and understood
the usage information accompanying the prod-
uct.
·Keep the usage information associated with the
product available for the entire service life and
pass it on to any possible subsequent users.
·Find out about device revisions and the asso-
ciated modifications of the usage information
associated with your product at www.janitza.de.
·This manual is also valid for alternative device
fronts.
1.4 About this user manual
If you have questions, suggestions or ideas for
improvement of the user manual, please let us
know via email at: [email protected].
1. Information on the device and the user manual
NOTE
This user manual describes the UMG 96-PA,
UMG 96-PA-MID and UMG 96-PA-MID+ devices
and provides information on the operation of these
devices. Separate validities and distinctions of the
devices are marked.
In addition to this user manual, please refer to the
additional documentation for your device, such as
·Installation instructions.
·"GridVis
®
software" quick guide.
·“Safety Information” supplement.
If applicable, also refer to documents about the
expansion modules, such as
·User manuals and
·Installation instructions.
Moreover, the
GridVis
®
software has an “online
help” feature.
1.5 Defective device/disposal
Before sending
defective devices (components)
back to the manufacturer for testing (including
accessories), contact the manufacturer’s support
department. When doing so, please bear the
terms for transportation in mind.
NOTE
Please return defective or damaged devices to
Janitza electronics GmbH in accordance with the
shipping instructions for air or road freight (com-
plete with accessories).
Observe special regulations for devices with built-
in batteries or rechargeable batteries!
Do not attempt to open or repair the device (the
component) on your own because otherwise all
warranty claims become invalid!
For the
disposal
of the device (the component),
please observe national regulations! Dispose of
individual parts, as applicable, depending on their
composition and existing country-specific regula-
tions, e.g. as
·Electronic waste.
·Batteries and rechargeable batteries.
·Plastics.
·Metals.
If needed, engage a certified disposal company to
handle scrapping.
Information on service and maintenance of your
device can be found in chapter „17. Service and
maintenance“ on page 86.