UMG 96-PA / UMG 96-PA-MID / UMG 96-PA-MID+
www.janitza.de
42
12.5 Display
Use the item
Display
of the measurement device
to configure the following display settings:
·Brightness,
·Standby after,
·Brightness (standby) and
·Colors.
·Open the
Configuration
window as previously
described.
Fig.
Display window
·Use buttons 3 (
) and 4 (
) to select the
corresponding item of the
Display
window and
confirm with button 6 (
Enter
).
·The entries for
Brightness
,
Standby after
and
Brightness (Standby)
are shown "yellow". The
item
Colors
leads to the
Colors
window.
·Use buttons 2 (
) and 5 (
) to change the
position of the digit to be set for each item and
use buttons 3 (
) and 4 (
) to change the digit
(-1/+1).
12.5.1 Brightness
Display brightness of the measurement device.
·Setting range:
30% - 100%
Default value:
70%
with 30% = dark
100% = very bright
12.5.2 Standby after
Time in seconds after which the display bright-
ness is set to the
Brightness (Standby)
that has
been configured.
·Setting range: 6
0 s - 3600 s
Default value:
900 s
12.5.3 Brightness (standby)
Display brightness to which the meter switches
after the standby time has expired.
·Setting range:
20% - 60%
Default value:
30%
with 20% = dark
60% = very bright
12.5.4 Colors
Colors for the display of current and voltage in the
graphical visualizations.
·Open the
Configuration
window as previously
described.
·Use buttons 3 (
) and 4 (
) to select the item
Display
and confirm with button 6 (
Enter
).
·The
Display
window appears.
·Use the buttons 3 (
) and 4 (
) to select the
item
Colors
and confirm with button 6 (
Enter
).
·The
Colors
window appears.
·Use buttons 2 (
), 3 (
), 4 (
) and 5 (
) to
select the color for the voltage or current of
Fig.
Configuration window with Display item activated.
·Use buttons 3 (
) and 4 (
) to select the item
Display
and confirm with button 6 (
Enter
).
·The
Display
window appears.
·Confirm your entries with button 6 (
Enter
) or end
the action by pressing button 1 (
Esc
).
·To return to the measuring display
Home
, press
button 1 twice (
Esc
) and then press button 2
(
Home
).
