UMG 96-PA / UMG 96-PA-MID / UMG 96-PA-MID+
www.janitza.de
46
Fig.
Reset window, restart device
Restart
This function restarts the measurement device.
·Open the
Configuration
window as previously
described.
·Use buttons 3 (
) and 4 (
) to select the item
System
and confirm with button 6 (
Enter
).
·The
System
window appears.
·Use buttons 3 (
) and 4 (
) to select the item
Reset
and confirm with button 6 (
Enter
).
·The
Reset
window appears.
·Use buttons 3 (
) and 4 (
) to select the item
Restart
and confirm with button 6 (
Enter
).
·The item
Restart
appears in “yellow."
·Use buttons 3 (
) and 4 (
) to select “
Yes
” or
“
No
”.
·Confirm your entries with button 6 (
Enter
) or end
the action by pressing button 1 (
Esc
).
·Pressing button 6 (
Enter
) restarts the device.
12.7 Modbus editor
The function
Modbus Editor
is used to configure
various functions or to read out measured val-
ues directly on the measurement device, without
parametrization software or a network connection.
Your measurement device does not require a net-
work connection for this.
NOTE
Optionally, you can configure Modbus ad-
dresses easily and conveniently in the GridVis
®
software.
You can use the Modbus address list (download
at www.janitza.de) to configure the
analog output
of the measurement device, for example, via the
device keyboard.
Example of configuring the measured value for
the analog output:
To assign a measured value to the analog output
of your measurement device, write the Modbus
address of the measured value (see the table of
frequently used measured values) to the
Modbus address 30001
To configure a start value for your measured
value, write the start value to the
Modbus address 30002
A final value for your measured value can be
entered in
Modbus address 30004
To assign the output ranges to the analog out-
put of a device, write as follows to the
Modbus address 30006
·a
0
for the output range
0-20 mA;
·a
1
for the output range
4-20 mA.
NOTE
Further information on the analog outputs can be
found in section „10. Analog outputs“ on page
