![background image](http://html1.mh-extra.com/html/jabiru/2200/2200_overhaul-manual_3122313154.webp)
Engine Overhaul Manual
Jabiru Aircraft
Pty Ltd
Jabiru 2200 & 3300 Aircraft Engines
This document is controlled while it remains on the Jabiru server. Once this no longer applies the document becomes uncontrolled.
ISSUE
1
2
3
4
5
6 7
Dated : 28/10/2014
Issued By: AS
Page: 154 of 201
L:\files\Manuals_For_Products\Engine_Manuals\Overhaul_Manual\JEM0001-7_Overhaul_Manual_DRAFT_(29_10_14).docx
Fit the components of the valve as shown in Figure 200. Ensure the circlip is fitted with the flat face
outwards and the curved face inwards
– and that it “snaps” into position clearly when fitting.
Press and release the poppet a few times to make sure everything is working as it should.
As a starting point it is recommended to not fit any washers underneath the spring. After the initial test
run washers can be added to fine-
tune the engine’s oil pressure.
Figure 200
– Oil Pressure Relief Valve Assembly