![background image](http://html1.mh-extra.com/html/jabiru/2200/2200_overhaul-manual_3122313135.webp)
Engine Overhaul Manual
Jabiru Aircraft
Pty Ltd
Jabiru 2200 & 3300 Aircraft Engines
This document is controlled while it remains on the Jabiru server. Once this no longer applies the document becomes uncontrolled.
ISSUE
1
2
3
4
5
6 7
Dated : 28/10/2014
Issued By: AS
Page: 135 of 201
L:\files\Manuals_For_Products\Engine_Manuals\Overhaul_Manual\JEM0001-7_Overhaul_Manual_DRAFT_(29_10_14).docx
Figure 168
– Engine Mount Plate Screw Locations
Apply Loctite 515 sealant to the
rear of the crankcase and sump as
shown in Figure 166. The cam
drive
gears
should
also
be
lubricated with oil now, before the
gear cover is fitted.
Tighten the screws holding the
plate to the crankcases. Note that
different sized screws are used on
the plate - Figure 168 refers.
= 5/16 x 1 1/4" UNC
1 x Bell 1 flat washer (2)
= 1/4 x 5/8” UNC (2)
= 1/4 x 1” UNC (4)
= Not Used
Note that some engines were
equipped with 2 extra screws into
the sump. These are unnecessary
and should be omitted at overhaul.
Loctite 243 is applied to the holes
for the gearbox mounting screws.