![background image](http://html1.mh-extra.com/html/jabiru/2200/2200_overhaul-manual_3122313126.webp)
Engine Overhaul Manual
Jabiru Aircraft
Pty Ltd
Jabiru 2200 & 3300 Aircraft Engines
This document is controlled while it remains on the Jabiru server. Once this no longer applies the document becomes uncontrolled.
ISSUE
1
2
3
4
5
6 7
Dated : 28/10/2014
Issued By: AS
Page: 126 of 201
L:\files\Manuals_For_Products\Engine_Manuals\Overhaul_Manual\JEM0001-7_Overhaul_Manual_DRAFT_(29_10_14).docx
Figure 153
– Tightening The Front Crankcase Studs
Apply a light coating of Loctite 515 sealant to one crankcase joining face. Ensure that all oil galleries
and feeds are free
– an excess of sealant can block these, leading to engine damage.
Fit one side of the crankcase to the crankshaft, taking care not to dislodge any of the bearing shells or
mark them with a sharp corner.
Place the camshaft in the journals of the fitted case half.
Fit the second side of the crankcase. The front and rear studs must now have nuts fitted and tightened
lightly.
Figure 154
– Applying Sealant and O-Ring to Cylinder Base