HSJ POWER VENTER SPECIFICATIONS
Performance curves
Static pressure (inches H2O) vs CFM (std. air) at selected flue gas temps.
NOTE: TO ARRIVE AT TOTAL SYSTEM STATIC PRESSURE REFER TO CURVE
AND ADD .38” TO COMPENSATE FOR VENT HOOD AND WIND RESISTANCE.
MOTOR ELECTRICAL DATA
Volts
115
Hertz
60
RPM
3000
Watts
95
Amps
1.26
Therm. Prot.
Yes
MOTOR MECHANICAL DATA
DESCRIPTION
Shaded Pole
Yes
Open
Yes
Int. Fan Cooled
Yes
BEARINGS
Type
Sleeve
Material
Sintered Iron
UC1 UNIVERSAL CONTROL
Maximum Power Consumption 1/2 Amp @
120 VAC 50/60 Hz + Venter motor load
Pre-Purge: Options (0,15,30,60 seconds)
Post-Purge: Factory set at 2 minutes
Options (0,30 seconds; 1,2,4,8,16 minutes)
Dimensions: 5” x 8” (2’ electrical whip inc.)
SAFETY / INTERLOCK
Fan Proving Switch
5 VDC UC1 board supplied power switched
through Fan Prover. UC1 burner / gas valve
interlock rated for 1 H.P. @ 120 VAC.
MODELS AND APPLICATION:
HSJ (Gas or Oil)
Used as a means of Side Wall Venting gas or
oil appliances which require a Post Purge cycle.
Used also to co-vent two gas heaters within
combined BTU/hr. input listed below (requires
accessory controls). Includes a Fan Proving
Switch and the UC1 Universal Control for 24V,
115V or “dry contact” actuation. LED diagnos-
tics and Pre / Post-purge options are standard
with the UC1.
HSUL-J (Discontinued 8/05)
HS115-J & HST-J (Discontinued 7/02)
Replace above models with HSJ.
Note:
Tjernlund Products, Inc. reserves the
right to make changes to specifications without
notification.
ADJUSTMENT ROD
DAMPER
TOLERANCE: ±1/8" UNLESS OTHERWISE NOTED
SHADED POLE MOTOR
3,000 R.P.M.
ADJUSTABLE DAMPER
FAN PROVING PRESSURE SWITCH
4 5/8
3 1/8
9 5/8
4 I.D.
2
4 I.D.
7
9 7/8
1 7/8
1
4 3/4
7 5/8
4 I.D.
5 5/8
7 1/2
2 1/4
5 1/4
FIGURE 2061000-3
1 1/2
FAN PROVER SENSOR
SHIELD
DRIP
1 1/8
-SIDE VIEW-
-END VIEW-
-PLAN VIEW-
P/N 8506001
REV. B 2/06
500°F
400°F
300°F
70°F
1.00
.80
.60
.20
.40
160
140
120
80
60
100
40
20
CFM (std air)
DIA.
VENT
BTU / HR
MAXIMUM PIPE LENGTH
OIL
GAS
23'
--
--
100'
100'
100'
100'
100'
35'
100'
100'
100'
125,000
100,000
75,000
50,000
4"
HSJ
500° F
400° F
300° F
FIRED
FIRED
AT STACK TEMPERATURE
(FT)
INPUT
PIPE
MODEL
TJERNLUND PRODUCTS, INC.
1601 Ninth Street • White Bear Lake, MN 55110-6794
PHONE (800) 255-4208 • (651) 426-2993 • FAX (651) 426-9547
Visit our web site • www.tjernlund.com
