RAMSES RT 2500 S Universal – User Guide
VI.5.9
C
ONFIGURING THE
P
INGER
M
ODE
P
ARAMETERS
The transponder can be set in
Pinger
mode by the tracking device. See Figure 28. You
can configure the type of signal (
PRF
), its
Duration
and
the regular time intervals (
Rate
)
that the transponder is going to transmit once in Pinger mode.
Figure 28 – Pinger
Procedure
Step Action
1.
If the device that interrogates the transponder only receives monochromatic signals, click
on the bottom of the vertical bar below
PRF
to display the single frequencies on the dial,.
If the transponder is tracked by POSIDONIA, click on the middle of the vertical bar below
PRF
to have access to the
POSIDONIA
M-FSK codes on the dial.
If the transponder is tracked by RAMSES, click on the top of the vertical bar below
PRF
to have access to the
RAMSES
M-FSK codes on the dial.
Click in the dial on the frequency of your choice to select it.
2.
Set the tab on the
Rate
ruler at the value to be selected.
3.
Set the tab on the
Duration
ruler at the value to be selected.
4.
End of procedure.
MU – RT961SMk2 – AN - 001- A – June 2010
37
Содержание RAMSES RT 2500 S Universal
