iCU-DC / iCU-EC Operating Instructions
Page - 5
1.2 Safety information
▪
The iCU-DC and iCU-EC CNC Controllers are constructed according
to current technological advances and recognised safety regulations.
▪
The machine must only be operated when it is in perfect technical
condition. Faults must be dealt with immediately. Children, and
anyone who has not been trained, are not permitted to operate the
machine.
▪
The machine must only be used according to its intended purpose.
Control of 2 to 6 linear or rotational axles with brushed DC servo
motors (iCU-DC) or brushless DC servo motors (iCU-EC) and
incremental measurement system (encoder).
▪
All work must only be done by authorised specialist personnel with
regard to the regulations of the electrical industry as well as accident
prevention regulations. Before opening the housing or doing any work
on the electrical installation, you must unplug the power cable.
▪
Assembly and use of equipment must be carried out according to the
norms of the Declaration of Conformity. The regulations and
threshold values observed by the manufacturer are not sufficient to
protect from improper use of the equipment.
▪
The device must not be exposed to high air humidity or high levels of
vibration.
▪
Keep this manual in a safe place and oblige each user to comply with
it!
▪
Failure to observe these operating instructions can cause property
damage, severe physical injuries, and death.
