iCU-DC / iCU-EC Operating Instructions
Page - 20
6
Software
6.1 Installation of the initialisation software
Initialisation / parameterisation of the motor output stages integrated in the
controller’s iCU
-DC / iCU-EC is done using the initialisation programs
DC
Setup.exe (2)
for:
brushed DC servo motors with motor output stage iMD10
or
AC
Setup.exe (3)
for:
brushless DC servo motors with motor output stage iMD20 and
Please proceed as follows to install the initialisation programs after the fact:
1. Connect the ProNC/Remote installation medium (supplied CD or USB stick) to
the control computer.
2. The following auto-start window will appear (when installing from CD).
If the auto-start window does not appear, please open Windows Explorer
and open the main directory of the installation medium.
Double-click on
the file “Autorun.exe”.
