Iran Tractor ITM 475, Инструкция для оператора

Страница: 16 / 118

1
General information 9
Cab
The safety cab has been designed for
fitment to this series of tractor and meets
all the legal requirements of cab safety
and noise levels.
Fig. 14: Cab.
Warning
If any of the above occurs, the safety
cab may become ILLEGAL.
The safety cab conforms to the vari-
ous international safety standards. The
cab MUST never be drilled, or modified to
install accessories or implements. Weld-
If ROPS is removed from the tractor,
or folded down, for a specific operation, it
must be refitted or erected immediately.
IMPORTANT! When refitting, the original
mounting bolts must be used and tight-
ened to the correct torque.
Implements or attachments
When implements or attachments are
used with the tractor, always follow the
safety precautions listed in the appropri-
ate operating instructions. When raising a
heavy object using a loader, always secure
the object carefully to avoid it’s falling or
causing injury to a bystander.
Seat belt
Fig. 16: Seat belt.
ing components to the cab or repairing any
damaged components is NOT PERMITTED.
Never attach chains or ropes to the main
frame of the cab for pulling purposes.
The only components which can be fit-
ted are genuine ITMCO parts, which must
be fitted by Dealer.
Roll-over protective structure (ROPS)
DO NOT weld, drill or alter ROPS safety
structure, whether supplied or locally fit-
ted. Damaged ROPS must not be straight-
ened or used. If damage does occur, con-
sult ITMCO Dealer.
Fig. 15: ROPS