Intergraph TDZ-400 Deskside, Руководство по установке и обслуживанию

Страница: 16 / 136

2 Chapter 1 - Getting Started
If you ordered a monitor from Intergraph, its carton contains the following
items.
♦
Monitor
♦
Monitor power cord
♦
Video cable
♦
Documentation
Note: If any of the base unit or monitor parts were not delivered, call the
Customer Response Center immediately at 1-800-633-7248
Retain all packaging materials. If you return equipment for repair, you must
return it in the original packaging to obtain warranty service (if provided
under your contract agreement).
Setting Up
Before you begin setting up your workstation, determine where you want to
place the system. Keep these guidelines in mind:
♦
Place the base unit in an area where air can circulate freely around it.
The front and back of the base unit should have at least a three-inch
clearance.
♦
Do not expose the system to high levels of dust, smoke, or moisture.
♦
Place the system in an area where the temperature range stays between
10
°
C and 26
°
C (50
°
F to 80
°
F). The optimum operating temperature is
21
°
C (70
°
F).
♦
Place the system in an area where the humidity stays between 20% and
80% (non-condensing). The optimum operating humidity is 50% (non-
condensing).
➤
To set up the workstation:
1. Set the footstands on the bottom of the base unit.
2. Connect the keyboard cable to the Keyboard port on the back of the
base unit. Refer to the following figure.