Intergraph TDZ-400 Deskside, Руководство по установке и обслуживанию

Страница: 67 / 136

Chapter 4 - Maintaining the System 53
11. Press
DEL
when the following message displays.
Hit DEL if you want to run Setup
12. In the Default menu, click on the Optimal icon. Select Yes to load the
values.
13. Exit AMIBIOS Setup. The system will restart automatically with the
new values in effect.
Changing the System Boot Sequence
➤
To change the workstation boot sequence:
1. Restart the workstation. The American Megatrends banner screen
displays with the following message:
Press DEL if you want to run Setup
2. Press
DELETE
. The AMIBIOS Setup Main Menu displays.
3. Click on the Advanced icon. A list of parameters displays.
4. Click on the System Boot Up Sequence parameter. The Options menu
displays with a choice of boot sequences. The default is C:, A:, which
designates the system hard disk drive (C:) is the initial device,
followed by the floppy disk drive (A:).
5. Click on the A:, C: parameter to change the boot sequence; then, press
ENTER
.
6. Select the Exit and Save option to exit the AMIBIOS Setup program.
7. Insert an MS-DOS-bootable diskette into the floppy disk drive; then,
restart the system.
For more information about the AMIBIOS Setup program, refer to Chapter
7, “Using AMIBIOS Setup.”