Intergraph TDZ-400 Deskside, Руководство по установке и обслуживанию

Страница: 85 / 136

71
Chapter 6
GLZ Graphics
This chapter provides instructions for replacing graphics boards in the
deskside workstation, and installing dual-screen upgrades.
Open the base unit, take static precautions, and attach an antistatic wrist
strap as described in Chapter 3, “Opening and Closing the Base Unit,”
before replacing graphics boards or installing dual-screen upgrades.
Note: Refer to GLZ6 Setup and Maintenance Guide for board replacement
and dual-screen upgrade instructions for GLZ6 graphics.
Replacing the Graphics Boards
The following table shows the graphics boards for each GLZ option installed
in the system’s PCI slots, including single screen (SS) and dual-screen (DS)
configurations, and the Geometry Accelerator board (GA).
Graphics Slot 1 Slot 2 Slot 3 Slot 4 Slot 5
GLZ1 SS GLZ1
GLZ1 DS GLZ1 GLZ1
GLZ1T SS GLZ1T
GLZ1T DS GLZ1T GLZ1T
GLZ2 SS GLZ2
GLZ2 DS GLZ2 GLZ2
GLZ3 GA GLZ3
GLZ3 DS GA GLZ3 GLZ3
GLZ4 GA GLZ4
GLZ4 DS GLZ4 GLZ4 GA
GLZ5 GA GLZ5
GLZ5 DS GA GLZ5 GLZ5