Intergraph TDZ-400 Deskside, Руководство по установке и обслуживанию

Страница: 82 / 136

68 Chapter 5 - Upgrading the System
7. When prompted to insert the source disk, insert the diskette containing
the configuration file and press
ENTER
.
8. When prompted to insert the destination disk, insert the SYSUTIL
diskette and press
ENTER
. The configuration file from the option
board manufacturer will be installed to the system and to the
SYSUTIL diskette.
9. Press
ESC
to return to the SCU Main Menu.
10. Select Step 4 to save the configuration, and then select Step 6 to exit
the SCU.
11. Remove the diskette from the combo drive and restart the system.
ISA Boards without a Configuration File
Some ISA board vendors do not include configuration files with their boards.
For these boards, you must use the SCU to define the ISA board to the
system (that is, manually create a configuration file) by following this
procedure:
➤
To define ISA boards without a configuration file:
1. Shut down and power off the system.
2. Insert the SYSUTIL diskette into the floppy diskette slot of the combo
drive; then restart the system.
3. When the MS-DOS Startup menu displays, select the System
Configuration Utility option.