114 Appendix B - Hardware Information
System Board Jumper Connectors
The system board uses jumper connectors to set the CPU frequency, G95
VGA mode disable/enable, and Vibra 16S sound disable/enable.
CPU Frequency
Systems designated as 150 MHz use the 60 MHz P6 bus, with jumpers
installed to obtain the 5/2x multiplier. Systems designated as 200 MHz use
the 66.67 MHz P6 bus, with jumpers installed to obtain the 3x multiplier.
The following tables show how to achieve each multiplier. IN denotes the
jumper is installed on both connector pins.
Primary CPU Multiplier (J60 - J63):
Connector
2x
5/2x
3x
7/2x
4x
5x
J60
IN
IN
IN
IN
IN
IN
J61
IN
OUT
IN
OUT
IN
IN
J62
IN
IN
IN
IN
OUT
OUT
J63
IN
IN
OUT
OUT
IN
OUT
Secondary CPU Multiplier (J47 - J50):
CPU Frequency
(Secondary CPU)
Voltage ID
Vibra 16S Sound
Disable/Enable
CPU Frequency
(Primary CPU)
G95 VGA Mode
Disable/Enable
Содержание TDZ-400 Deskside
