Intergraph TDZ-400 Deskside, Руководство по установке и обслуживанию

Страница: 35 / 136

Chapter 2 - Configuring the System 21
16. Select OK to return to the Video Configuration dialog with the
modified gamma correction/contrast values in effect, or select Cancel
to return to the Video Configuration dialog without updating the
gamma correction/contrast.
17. Stop Video Configuration.
If you use 3D applications with the GL driver, the video display may update
slowly when you drag objects across it. To avoid this inconvenience, turn
off full drag before using 3D applications with the GL driver.
➤
To turn off full drag:
1. Open Desktop in the Windows NT Control Panel. The Desktop
Settings dialog displays.
2. Under Applications, clear the Full Drag check box.
3. Select OK.
Windows NT lets you use software cursors, such as decorated or animated
cursors, in place of the standard cursor. If you use a software cursor while
running an OpenGL application, the performance of that application will
drop sharply whenever you position the software cursor in that application’s
window. For optimum performance of OpenGL applications, Intergraph
recommends that you use only the standard cursor.
Changing the Default Video Display Driver
After configuring the video display and restarting the system, you can
configure the system to use the Intergraph GL video display driver by
default.
➤
To change the default video display driver:
1. Open System in the Windows NT Control Panel. The System dialog
displays.
2. Under Operating System, select
Windows NT Workstation 3.51
from the Startup list.
3. Select OK.