Intergraph TDZ-400 Deskside, Руководство по установке и обслуживанию

Страница: 3 / 136

Power Input Rating
The product ID information is located on the back of the base unit. The unit rating is listed in
Appendix B, “Hardware Information.”
Power Cord Specifications
For units operating at 115 V: Use a UL listed cord set consisting of a minimum 18 AWG,
type SJT three conductor cord, a maximum of 15-feet in length with a parallel blade, and a
grounding type attachment plug rated 15 A, 125 V.
For units operating at 230 V (domestic use): Use a UL listed cord set consisting of a
minimum 18 AWG, type SJT three conductor cord, a maximum of 15-feet in length with a
tandem blade, and a grounding type attachment plug rated 15 A, 250 V.
For units operating at 230 V (outside of U.S.): Use a cord set consisting of a minimum 18
AWG cord and grounding type attachment plug rated 15 A, 250 V. The cord set should have
the appropriate safety approvals for the country in which the equipment will be installed and
marked HAR.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy. If the
equipment is not installed and used in accordance with the instruction manual, it may cause
harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in
which case the user will be required to correct the interference at his own expense.
CDC Statement
This digital apparatus does not exceed the Class A limits for radio noise emissions from
digital apparatus set out in the Radio Interference Regulations of the Canadian Department of
Communications.