Intel 640 - Pentium 4 640 3.2GHz 800MHz 2MB Socket 775 CPU Скачать руководство пользователя страница 10 | Manualshive

Страница: 10 / 105

background image

Introduction

R

10

Thermal/Mechanical Design Guide

1.1.3 Document

Scope

This design guide supports the following processors:

•

Pentium 4 processors 570/571, 560/561, 550/551, 540/541, 530/531, and 520/521 in the 775-
land LGA package

•

Pentium 4 processor 670/672, 660/662, 650, 640, and 630 in the 775-land LGA package

•

Pentium 4 processor Extreme Edition in the 775-land LGA package

In this document, when a reference is made to “the processor” and/or “the Pentium 4 processor in
the 775–Land LGA package”, it is intended that this includes all the processors supported by this
document. If needed for clarity, the specific processor will be listed.

In this document, when a reference is made to “the datasheet”, the reader should refer to either the

Intel

®

Pentium

®

4 Processors 570571, 560/561, 550/551, 540/541, 530/531, and 520/521

∆

– On

90 nm Process in the 775–Land LGA Package and Supporting Hyper-Threading Technology
Datasheet

or the

Intel

®

Pentium

®

4 Processor 6xx

∆

Sequence and Intel

®

Pentium

®

4 Processor

Extreme Edition Datasheet – On 90 nm Process in the 775-land LGA Package, supporting Intel

®

Extended Memory 64 Technology

Φ

, and supporting Intel

®

Virtualization Technology

as

appropriate. If needed for clarity, the specific processor datasheet will be referenced.

Chapter 2 discusses package thermal mechanical requirements to design a thermal solution for the
Pentium 4 processor in the 775–land LGA package in the context of personal computer
applications. Chapter 3 discusses the thermal solution considerations and metrology
recommendations to validate a processor thermal solution. Chapter 4 addresses the benefits of the
processor’s integrated thermal management logic for thermal design.

Chapter 5 provides information on the common Intel reference thermal solution for the Pentium 4
processor in the 775–land LGA package discussed in this document. Chapter 6 discusses the
implementation of acoustic fan speed control.

THE PHYSICAL DIMENSIONS AND THERMAL SPECIFICATIONS OF THE PROCESSOR
THAT ARE USED IN THIS DOCUMENT ARE FOR ILLUSTRATION ONLY. REFER TO
THE

DATASHEET

FOR THE PRODUCT DIMENSIONS, THERMAL POWER DISSIPATION

AND MAXIMUM CASE TEMPERATURE. IN CASE OF CONFLICT, THE DATA IN THE
DATASHEET SUPERSEDES ANY DATA IN THIS DOCUMENT.

«
...
8
9
10
11
12
...
»

Содержание 640 - Pentium 4 640 3.2GHz 800MHz 2MB Socket 775 CPU










































































































Отзывы:

Нет отзывов

Похожие инструкции для 640 - Pentium 4 640 3.2GHz 800MHz 2MB Socket 775 CPU

Бренд: National Instruments Страницы: 9

Бренд: ekwb Страницы: 2

Бренд: ZoneVu Страницы: 15

Бренд: FUNcube Страницы: 23

Бренд: LaView Страницы: 2

Бренд: Cypress Semiconductor Страницы: 28

ELITE LCD UPGRADE KIT

Бренд: Corsair Страницы: 11

Xtreme Networked Boat

Бренд: Broadband Products Страницы: 16

Бренд: MEN Страницы: 48

11th Gen Intel Core U-Series

Бренд: IBASE Technology Страницы: 70

Бренд: Xilinx Страницы: 36

Бренд: Enterasys Страницы: 5

Бренд: Spectrum Digital Страницы: 11

Application Module 9109 OCU-DP

Бренд: Paradyne Страницы: 8

AN5506-04 Series

Бренд: FiberHome Страницы: 146

Бренд: VALKYRIE Страницы: 26

Бренд: Hitachi Страницы: 14

SJ/L-EN Ethernet Communications Module

Бренд: Hitachi Страницы: 36

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды