Intel 640 - Pentium 4 640 3.2GHz 800MHz 2MB Socket 775 CPU Скачать руководство пользователя страница 53 | Manualshive

Страница: 53 / 105

background image

Acoustic Fan Speed Control

R

Thermal/Mechanical Design Guide

53

6

Acoustic Fan Speed Control

6.1

Acoustic Fan Speed Control

As processor power has increased, the required thermal solutions have generated increasingly
more noise. Intel has added an option to the processor thermal specifications that allows the
system integrators to have a quieter system under typical usage. T

CONTROL

and the on-die thermal

diode provide the system integrator the means to implement a quieter system design.

Acoustic fan control implementations consist of the following items

•

A motherboard designed with a fan speed controller with the following functionality:

⎯

PWM fan control output

⎯

Remote thermal diode measurement capability

•

A motherboard with a 4-pin fan header for the processor heatsink fan.

•

Processor heatsink with 4–wire PWM controlled Fan.
A thermistor in the fan hub is recommended, but not a requirement. The reference solution
and the Boxed Pentium 4 Processor in 775–land LGA package have implemented a
thermistor into the design.

The following sections will discuss the necessary steps to implement Acoustic Fan Speed Control.

6.2

Thermal Solution Design

6.2.1

Compliance to Thermal Profile

The first step is to select or design a processor thermal solution that meets the thermal profile for
the Pentium 4 Processor in the 775–land LGA Package. See Section 2.2.2 for the definition of the
thermal profile then consult the processor datasheet.

The designer needs to ensure that when the heat sink fan is operating at full speed the thermal
solution will meet the T

C-MAX

limits at TDP. The slope of the thermal profile allows the designer

to make tradeoffs in thermal performance versus the inlet temperature to the processor fan
heatsink.

6.2.2

Determine Thermistor Set Points

A thermistor implemented in the hub of a fan is a first level of fan speed control. It provides an
easy and cost effective means to begin acoustic noise reduction. It will, by design, run the fan at
an appropriate speed based on the ambient conditions.

«
...
51
52
53
54
55
...
»

Содержание 640 - Pentium 4 640 3.2GHz 800MHz 2MB Socket 775 CPU










































































































Отзывы:

Нет отзывов

Похожие инструкции для 640 - Pentium 4 640 3.2GHz 800MHz 2MB Socket 775 CPU

Univerge SV8100

Бренд: NEC Страницы: 44

Бренд: X-Micro Страницы: 9

Бренд: X-Micro Страницы: 19

Бренд: Endace Страницы: 51

Бренд: Kanguru Страницы: 13

Бренд: NEC Страницы: 70

ipRocketLink IAD 3086

Бренд: Patton electronics Страницы: 12

ULTRIX-FM-NS-1RU

Бренд: Ross Страницы: 5

PSJ-VZ58 gen3 OEM

Бренд: Grizzly Страницы: 12

Бренд: Mitsubishi Страницы: 188

Бренд: RAK Страницы: 14

Бренд: StetSom Страницы: 18

Бренд: Acces I/O products Страницы: 13

Бренд: IC Realtime Страницы: 131

Бренд: Iomega Страницы: 32

Бренд: AMX Страницы: 1

Light Palette 64428

Бренд: Philips Страницы: 2

Бренд: Philips Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды